\section{Numerical values} \label{app:numbers} This appendix collects the values behind the statements of the main text that were made there in words. Each entry is the evaluation of a formula stated in the text, with the physical constants at their recommended values, or the result of the likelihood fit described below. Entries that concern the tensor margin are estimates in the sense of Remark~\ref{rem:tt-estimate}. \paragraph{Kinematics of the strip.} Table~\ref{tab:kin} gives the scales that make the near-null approximations of Sections~\ref{sec:setting} and~\ref{sec:scalar} safe on the band $u\in[1,10^{6}]~\mathrm{m^{-2}}$. \begin{table}[H] \centering \caption{Scales of the near-cone strip and of the corrections neglected on it, with the place where each enters. The photon wavenumber is $k=E/\hbar c$.} \label{tab:kin} \small \begin{tabular}{lll} \hline quantity & where & value\\ \hline $4\pi\lP^2$ & Eq.~\eqref{eq:s} & $3.28\times10^{-69}~\mathrm{m^2}$\\ $k$ at 1~keV & Section~\ref{sec:source} & $5.07\times10^{9}~\mathrm{m^{-1}}$\\ weight of the $ll$ part, $u^2/k^4$ & Eq.~\eqref{eq:split} & $1.5\times10^{-27}$ at $u=10^{6}~\mathrm{m^{-2}}$, 1~keV (its largest)\\ non-conformal remainder, $u/k^2$ & Eq.~\eqref{eq:coupling} & $3.9\times10^{-16}$ at 10~keV, $u=10^{6}~\mathrm{m^{-2}}$\\ null extent of a packet, $k/u$ & Remark~\ref{rem:P} & $7.1\times10^{11}$~m at $u=1~\mathrm{m^{-2}}$, 140~keV\\ boost onto the photon shell, $k/\sqrt u$ & Section~\ref{sec:xray} & $7.1\times10^{11}$ at $u=1~\mathrm{m^{-2}}$, 140~keV\\ friction scale, $u_\eta=2kH_0/c$ & Sections~\ref{sec:tensor},~\ref{sec:objections} & $1.0\times10^{-14}~\mathrm{m^{-2}}$ at 140~keV\\ matter-induced mass, $8\pi G\rho/c^2$ & Section~\ref{sec:objections} & $5.5\times10^{-23}~\mathrm{m^{-2}}$ in liquid xenon\\ \hline \end{tabular} \end{table} \paragraph{The identity of Proposition~\ref{prop:cone}.} The value $\langle(\Phi+\psi)^2\rangle=3/(2\alpha k^4)$ follows from the argument in the proof. As a numerical check, the quadratic form of~\eqref{eq:dewitt} was evaluated directly and agrees with it to $2\times10^{-9}$ over $b\in[-100,0.33]$ and $\omega/k\in[0,3]$. \paragraph{The atom.} Table~\ref{tab:atom} gives the two conversion factors for an isolated xenon atom in the local-density approximation, and the share of the tensor conversion that lies at momentum transfers where neighbouring atoms of the liquid interfere. \begin{table}[H] \centering \caption{Atomic conversion factors of an isolated local-density xenon atom at photon energy $E$: the near-cone atomic factor $\Acone$ of Eq.~\eqref{eq:acone}, the ratio $\XTT$ of tensor to trace emission of Eq.~\eqref{eq:xtt}, and the share of the numerator of~\eqref{eq:xtt} that lies at $Q<2$~\AA$^{-1}$, where inter-atomic interference acts in liquid xenon. A dash marks an energy at which the quantity is not tabulated.} \label{tab:atom} \small \begin{tabular}{lcccccc} \hline $E$ (keV) & 1 & 5 & 10 & 30 & 50 & 140\\ \hline $\Acone$ & 0.002 & --- & 0.258 & 0.633 & 0.786 & 0.955\\ $\XTT$ & --- & 1.62 & 2.29 & 4.27 & --- & 9.60\\ share at $Q<2$~\AA$^{-1}$ & --- & 23\% & 7\% & 1.6\% & --- & 0.5\%\\ \hline \end{tabular} \end{table} \paragraph{The likelihood.} The limit~\eqref{eq:limit} is a profile likelihood of the XENONnT SR0 spectrum~\cite{XENONnT2026}: 84 bins from 1 to 140~keV, 8 profiled background components, an efficiency nuisance, an exposure of 1.16~t\,y, one-sided 95\% CL. Without calibration it reproduces the published Di\'{o}si--Penrose limit at $C=1$ as $R_0>4.483$~\AA\ against the published 4.5~\AA, where $R_0$ is the smearing length of that model. Every margin in this paper uses the uncalibrated likelihood; the calibration factor 1.0115 that closes the gap would raise every margin by that factor. \paragraph{Variants of the scalar margin.} Row 1 of Table~\ref{tab:margins} is $1.19\times10^{8}$ for the observed spectrum; its median expected value for a background-only spectrum is $6.6\times10^{7}$. With the elastic structure factor alone it is $1.18\times10^{8}$. An envelope for the order-$v^2/c^2$ correction of bound electrons to the coherent amplitude, $c_v\in[-3,3]$ times the kinetic form factor, spans $1.11$--$1.27\times10^{8}$. The isotropic form of the rate of Manti \emph{et al.}~\cite{Manti2026} moves every margin by 1.4\%. With a scalar mass $m^2=10^{6}~\mathrm{m^{-2}}$ the margin is still $6.0\times10^{6}$; it reaches one at $m^2=8.6\times10^{12}~\mathrm{m^{-2}}$. \paragraph{The boost.} Table~\ref{tab:gamma} gives the scalar margin when the strip is cut at the largest boost $\gamma_{\max}$ up to which the scalar sector is Lorentz invariant. \begin{table}[H] \centering \caption{Margin of the scalar floor (row 1 of Table~\ref{tab:margins}) when the strip at energy $E$ is restricted to $u\geq(k/\gamma_{\max})^2$, refitted to the same likelihood. The margin reaches one at $\gamma_{\max}=1.1\times10^{7}$, a threshold set by the 1--2.2~keV bins and uncertain by about $10\%$; that of the constant-coupling window (row 2) at $\gamma_{\max}=1.6\times10^{10}$.} \label{tab:gamma} \small \begin{tabular}{lcccc} \hline $\gamma_{\max}$ & $10^{9}$ & $10^{8}$ & $1.2\times10^{7}$ & $10^{7}$\\ \hline floor margin & $8.3\times10^{6}$ & $1.6\times10^{4}$ & 2.1 & 0.68\\ \hline \end{tabular} \end{table} \paragraph{The tensor strip.} Table~\ref{tab:tensor-values} gives the values behind Section~\ref{sec:tensor}. \begin{table}[H] \centering \caption{Values behind the tensor exclusion. All margins are estimates: they use the elastic structure factor of an isolated atom, and the row without the Coulomb stress is in addition gauge dependent. ``Median'' is the median expected value for a background-only spectrum.} \label{tab:tensor-values} \small \begin{tabular}{>{\raggedright\arraybackslash}p{8.3cm}>{\raggedright\arraybackslash}p{6.6cm}} \hline quantity & value\\ \hline margin, Newton's band $u\in[1,10^{6}]~\mathrm{m^{-2}}$ & $1.7\times10^{9}$; median $9.8\times10^{8}$\\ template-weighted $\XTT$ implied by that margin & $9.4$ (margin divided by the elastic scalar margin $1.18\times10^{8}$ and by $\tfrac32$)\\ margin, band $u\in[1~\mathrm{m^{-2}},10^{-2}k^2]$ & $6.0\times10^{9}$; logarithm of the band at 140~keV $50.0$, against $13.8$\\ sensitivity test: normalisation $\tfrac32\to1$, $\XTT$ frozen at its 5~keV value & $1.9\times10^{8}$\\ without the Coulomb stress: $\sum\langle v^2/c^2\rangle$ & $0.77$\\ without the Coulomb stress: template $\tfrac{16}{3}\sum\langle v^2/c^2\rangle/(Z^2+Z)$ & $1.4\times10^{-3}$\\ without the Coulomb stress: margin, Newton's band & $2.6\times10^{5}$\\ Lifshitz factor~\eqref{eq:lifshitz} at $M_T=10$~eV & $4.4\times10^{-7}$, $3.4\times10^{-8}$, $8.2\times10^{-10}$ at 10, 30, 140~keV\\ margin with the $z=3$ dispersion & 12 at $M_T=30$~eV; 136 at 100~eV\\ edge of the $z=3$ dispersion (margin one) & $M_T=8.6$~eV; median $9.1$~eV\\ edge with the $q^4$ term alone ($z=2$) & $M_T=0.24$~eV\\ \hline \end{tabular} \end{table} The template-weighted $\XTT$ is an output of the refit, not an input. The sensitivity test varies the normalisation of Proposition~\ref{prop:tt-emission} and the energy dependence of $\XTT$ only; it is not a floor against the uncertainties of the atom model and of assumption (T3).